Integrated Network Attached Storage Device Dell EqualLogic PS-M4110 With Blade Server

Dell EqualLogic PS-M4110 Blade Array

Aggregate your data center
By aggregating compute, networking, and storage in a single PowerEdgeTM M1000e blade server chassis, you can help reduce data center floor space and reduce cable configuration and power/cooling requirements.

Integrate enterprise storage devices with blade servers
Provides highly flexible storage for your blade server environment with dual- and half-height blade server arrays that can be installed in any slot of the PowerEdge M1000e chassis.

Easily expand your storage
EqualLogic's superior peer-to-peer extension architecture saves time by extending both performance and capacity without disruption.

Help simplify management and reduce risk
The EqualLogic PS-M4110 Blade Server Array has all-in-one, enhanced software features that provide centralized monitoring and reporting, as well as powerful data protection for peace of mind.

Equallogic PS M4110 storage
The EqualLogicTM PS-M4110 blade server array is available in four different configurations.

PS-M4110E
Help affordable SMBs increase storage capacity, performance and connectivity with the affordable EqualLogicTM PS-M4110E 10 GbE iSCSI blade server array.

PS-M4110X
Deploy an affordable solution with the Dell EqualLogic PS-M4110X 10 GbE iSCSI blade server array to balance the performance and capacity of your applications.

PS-M4110XV
Take control of critical applications with the high-performance Dell EqualLogic PS-M4110XV 10 GbE iSCSI blade server array.

PS-M4110XS
Leverage the Dell EqualLogic PS-M4110XS 10 GbE iSCSI blade server array to experience the advanced tiering of storage solutions that combine low-latency performance and hard drive capacity for SSDs.

Technical Parameters

Product Configuration PS-M4110E PS-M4110X PS-M4110XV PS-M4110XS
Storage controller 2 controllers, 2 GB of non-volatile memory per controller
Network interface Redundant 10 Gb connection through Fabric A or B
Hard disk Fourteen 2.5" hot swap hard drives Nine 10K SAS +
Five (5) solid state drives
Hard disk capacity 1 TB 7.2K NL-SAS or NL-SAS SED 600 GB, 900 GB or 1.2 TB 10K SAS or SAS SED (SED 1.2 TB) 300 GB, 600 GB 15K SAS or 300 GB SAS SED 600 GB or 1.2 TB 10K SAS + 400 GB or 800 GB solid state drive
System capacity 14 TB, using fourteen (14) 1 TB 7.2K NL-SAS drives or SED 8.4 TB, using fourteen (14) 600 GB 10K SAS drives
12.6 TB, using fourteen (14) 900 GB 10K SAS drives or SEDs
16.8 TB, using fourteen (14) 1.2 TB 10K SAS drives 4.2 TB, using fourteen (14) 300 GB 15K SAS drives or SEDs
8.4 TB, using fourteen (14) 600 GB 15K SAS drives 14.8 TB, using assigned configuration
Nine (9) 10K SAS drives and five (5) solid state drives
Technical Highlights PS-M4110E PS-M4110X PS-M4110XV PS-M4110XS
Volume Up to 256 per array / up to 512 groups each containing only one blade array
Snapshots 128 per volume / each group containing only one blade array up to 2048
Number of volume connections per PS Series group Up to 512 per pool / up to 1024 groups each containing only one blade array
Host Protocol Any standard-compliant Internet SCSI (iSCSI) initiator.
Supported operating systems
Microsoft Windows Server® with Hyper-V®
VMware® ESX ServerTM
Red Hat® Enterprise Linux® (RHEL)
SUSE® Enterprise Linux® (SLES)
Oracle® Linux®
Citrix® XenServer®
For a complete list of supported operating system versions, including software launchers, NICs/CNAs, and HBAs, see the Dell Storage Compatibility Matrix: http://en.community.dell.com/dell-groups/dtcmedia/ m/mediagallery/20438558 (English version).
Supported RAID RAID 5, RAID 6, RAID 10, and RAID 501 RAID 6 acceleration
TCP network support Complies with IPv4 and IPv6 standards. Certified by USGv6.
Extended options can be used online with other PS Series arrays in the same SAN group. Up to two PS-M4110 blade arrays can be accommodated in a single group, and up to four blade arrays can be accommodated in each blade chassis. In addition, the PS-M4110 expands into a traditional PS Series array outside the blade chassis, accommodating up to sixteen arrays in a single SAN group. In addition, the PS and SC Series provide universal management and cross-platform replication between arrays, enabling PS Series customers to flexibly add SC Series arrays to their environment at their discretion. 2
Power Supply PS-M4110E PS-M4110X PS-M4110XV PS-M4110XS
Power: 450 W 450 W 450 W 450 W
Voltage: 12 V DC 12 V DC 12 V DC 12 V DC
Maximum input power: 450 W 450 W 450 W 450 W
Input current: 37.5 A 37.5 A 37.5 A 37.5 A
Typical power consumption: 248.9 W 261.0 W 293.3 W 230.4 W
Chassis PS-M4110E PS-M4110X PS-M4110XV PS-M4110XS
Weight: 12.49 kg (27.54 lbs) 12.87 kg (28.38 lbs) 12.62 kg (27.82 lbs) 12.62 kg (27.82 lbs)
Physical Specifications: Half-height, double-wide blade storage
Height: 189 mm (7.44 in) 189 mm (7.44 in) 189 mm (7.44 in) 189 mm (7.44 in)
Width: 102 mm (4.015 in) 102 mm (4.015 in) 102 mm (4.015 in) 102 mm (4.015 in)
Deep: 515 mm (20.275 inches) 515 mm (20.275 inches) 515 mm (20.275 inches) 515 mm (20.275 inches)
Related Item or Other Components PS-M4110E PS-M4110X PS-M4110XV PS-M4110XS
Blade chassis PowerEdge M1000e
Blade I/O Modules Dell Networking MXL 10/40 GbE Blade Switches, PowerConnect M8024-k, M8428-k, and 10 Gb Ethernet Direct k Modules (with external switches)
Power and fans are provided by the Dell PowerEdge M1000e blade chassis
Rack Support See Dell PowerEdge M1000e Blade Chassis

reliability
Redundant hot-swap controllers and hot-swappable disks, redundant network paths through internal fabric wiring in the M1000e chassis, redundant fans and power supplies from the M1000e chassis

Panel monitoring system
Automatic spare parts configuration and use
SMART
Automatic bad block replacement
Auto-Stat Disk Monitoring System (ADMS) that monitors the health of data on disk

management
Dell Chassis Management Console (CMC) integration
Dell Storage Manager (DSM): Allows you to perform daily tasks across SC Series and PS Series arrays from a single management interface 2
PS Series Group Manager
PS Series SAN Headquarters Multi-Group Performance and Event Monitoring Tools
Serial console
Configurable separate management network
SNMP, Telnet, SSH, HTTP, Web (SSL), host scripting
Multiple administrator support

safety
CHAP authentication
iSCSI access control
Access control for the management interface, including RADIUS support
IPSEC
SED

Notification method
SNMP traps, emails, system logs